home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Suzy B Software 2
/
Suzy B Software CD-ROM 2 (1994).iso
/
bootup
/
boot_a2m
/
edos_002
/
read_me.txt
< prev
Wrap
Text File
|
1995-05-02
|
3KB
|
80 lines
ExtenDOS Patch Program
This program will upgrade the UNIDRIVE.DOS and
UNI_BDDS.DOS modules of ExtenDOS version 1.1 to
version 1.11. It will ONLY upgrade version 1.1.
[This patch updates UNIDRIVE.DOS & UNI_BDDS.DOS from 1.2 to 1.3].
This program is copyright ╜ 1994 by Roger Burrows. All rights are
reserved. This program may be freely distributed to all legitimate
registered users of ExtenDOS.
Any questions or comments, please contact us at:
Anodyne Software, 6 Cobbler Court, Ottawa, Ontario K1V 0B8, Canada.
GEnie: R.BURROWS1
What is needed to upgrade
=========================
. An un-modified ExtenDOS distribution diskette, version 1.1, or
. An ExtenDOS distribution diskette, version 1.0, that has been
previously patched by PATCH001.TOS
How to upgrade the UNIDRIVE.DOS & UNI_BDDS.DOS modules
======================================================
1. Make sure you have made a backup copy of the ExtenDOS distribution
diskette.
2. Copy the PATCH002.TOS file to the ExtenDOS distribution diskette.
3. Run PATCH002.TOS by double-clicking on it from the desktop. The
program will create backup copies of the original files, named
UNIDRIVE.BAK & UNI_BDDS.BAK, and then patch the original copies.
The final message should be "All modules patched successfully".
If not, please read the error messages issued carefully; they
should indicate what the problem is.
4. Once you have finished upgrading your distribution diskette,
make a backup copy of this newer version.
** VERY IMPORTANT STEP, READ CAREFULLY **
5. To install the newer version on your system, you MUST replace the
following ExtenDOS files in your system with the corresponding
files from the newly upgraded disk:
UNIDRIVE.DOS
UNI_BDDS.DOS
If you get an error message
===========================
If you get an error message during the patch process and cannot
resolve the problem, you can mail us the diskette so that we can
upgrade it.
To have your disk upgraded by us, you need to:
1. Send in your original ExtenDOS distribution diskette.
2. Enclose a cheque for $5 + $2 shipping & handling ($7 total).
3. Enclose a note with your name, address, and daytime phone number.
In return you will receive version 1.11 of ExtenDOS, which includes
Falcon030 support as well as the UNIDRIVE.DOS and UNI_BDDS.DOS
upgrades.
Changes for UNIDRIVE.DOS & UNI_BDDS.DOS
=======================================
This version contains the following fixes:
+ If the B= and/or P= parameters were omitted, an erroneous error
message 'device not responding' could be issued.